H&M輕工業產品之生產及質量控制手冊檢查清單
9.6
Assembly methods 裝配方法
9.6.a
Are the assembled products strong and durable for it′s intended use? 組裝的產品是否結實耐用？
9.6.1
Soldering, Welding 焊接和電焊
9.6.1.a
Are week points avoided on the soldered parts? 如何避免焊接部件中的薄弱點？
9.6.1.b
Are soldering covering enough area? 焊接是否覆蓋足夠的區域？
9.6.1.c
Are Supplier avoiding build up excessive material? 供應商是否避免累積過多的材料？
9.6.2
Gluing 涂膠/粘合
9.6.2.a
Are the Supplier securing that the glue are suitable for the product? 供應商能否保證使用的膠適用于其產品？
9.6.2.b
Is the product free from visible glue mark? 產品能否避免出現可見的膠水痕跡？
9.6.2.c
Does the factory have good condition for drying the details/ products? 工廠是否有良好的干燥條件，對產品或裝飾件進行烘干？
9.6.3
Riveting, Screwing, Nailing 鉚接，螺紋連接，打釘固定
9.6.3.aDoes the Supplier control that Riveting, Screwing, Nailing procedure are strong enough for the products entended use? 供應商是否對鉚接，螺紋連接，打釘工序進行控制以確保產品用途的耐用性？
10.
Finishing 織物整理
10.1
Cleaning, Refining incl. Blasting, Sanding, Filling, Tumbling, Polishing 清洗，精制：含噴砂，打磨，填充，研磨，拋光
10.1.a
Are correct cleaning, refining methods used for : 對……是否使用正確的清洗，精制工藝：the product?產品？ surface treatment? 表面處理？
10.1.b
Are Supplier making sure that all e.g. dirt, soil, dust, lubrication oil, grease removed from the products/ details 供應商能否確保將所有的泥土，污垢，灰塵，潤滑油，油脂從產品/裝飾件上去除？
10.1.c
Does the Supplier have a control system to make sure all following are taken away? 供應商是否有控制系統能保證把下列的問題去除？
uneveness?不均勻
burr & excessive build up material?毛邊；和過度的累積材料
sharp & rough edges? 尖銳和粗糙的邊緣
spots? 污漬
blisters? 氣泡
11.
Annealing 熱處理
11.a
Does the Supplier secure that sufficient time in Lehr are given? 供應商能否確定給予退火爐加工足夠的時間？
12.
Surface treatments 表面處理
12.a
Are good house keeping maintained and secured in: 是否保持良好的內務衛生工作：
all surface treatements areas? 在所有的表面處理區域？
chambers?臥室？
baths?浴室
hangers?衣架？
12.b
Does the Supplier have a system to secure that: 供應商是否有系統可確定：
products? 產品？
details?裝飾件
are kept clean, free from dust before enteringsurface treatments? 在進行表面處理之前保持清潔，無灰塵？
12.c
Are all derails and assembly parts separately during surface treatments? 在表面處理期間，是否對裝飾件和組裝件分別處理？
12.1
Phosphatheing 磷化
12.2
Plating/ Electro plating 電鍍
12.1.a
Does the Supplier have a method to secure that all layers on the final products are used and will be strong enough for the products intended use? 供應商是否方法確定成品中的使用的所有層面足夠結實？
12.1.b
Are daily tests done and records kept? 是否每天進行測試并保存記錄？
12.1.c
Are the Supplier using suitable time and temperature for drying the details/ products? 對于烘干裝飾件和產品，工廠是否使用適當?shù)臅r間和溫度？
12.1.d
Are the plating units maintained on regular basis?是否定期維護電鍍部件？
12.3
Painting, Epoxying 著色，環氧樹脂
12.3.a
Does the Supplier control that suitable paint/ epoxy are used for the product?供應商能否控制為產品使用的是適合的顏料和環氧樹脂？
12.3.b
Are dry boxes and fans used?是否使用干燥箱和電風扇？
12.3.c
Are temperature and time controlled? 是否控制溫度和時間？
12.4
Spray coating, Spray colour 噴涂，噴色
12.4.a
Does the Supplier have a control system to secure that colour and coating are correct for the product? 供應商是否有控制體系以保證產品的顏色和涂層是正確的？
12.4.b
Are time, temperature, drying/ baking conditions suitable for the coating and colour used?時間、溫度，干燥/烘烤條件是否適合涂層和著色的使用？